Infrared Building Inspections in Renton

Finding Out What You Don’t Know

A home inspection in Renton includes many things, including knowledge,. For the most advanced and thorough home inspections in Renton, request that infrared thermography be included.

This advanced technology is used to locate and pinpoint sources of leaks and water intrusion in your Renton residence without any need for destructive source finding.

Pacific Northwest Building Inspections in Renton believes the infrared camera to be one of the most important tools in a Renton home inspector's tool bag. Infrared thermography in Renton is a scientific process that essentially measures thermal or infrared energy, infrared thermography can detect insulation, heating, air leakage, and cooling problems.

Without any disruptive – or destructive – exploration, Pacific Northwest Building Inspections in Renton can discover water leaks around windows, roofs, interior and exterior walls, doors, and water pipes. Wall insulation and the heating and cooling efficiency of windows and doors can also be assessed by using an infrared camera.

>> Pacific Northwest Building Inspections in Renton has uncovered leaks around in typically non-suspect areas, such as a living room where no visible damage was apparent. With infrared thermography in Renton, substantial water damage was discovered. Upon further investigation, a sprinkler head was found to have been directing water behind the house’s siding. Several thousand dollars later, the sprinkler head was redirected and the sheathing and framing was repaired. A traditional building inspection would not have been able to identity this issue.

Here are some common areas where infrared thermography in Renton is most helpful:

Water Invasion

Scanning interior surfaces of your home with an infrared camera can reveal excess moisture due to plumbing leaks, roof leaks, and leaks around windows, to name a few. Wet areas of building materials cool when energy is transferred during the water evaporation process; therefore, a wet (“cooler”) area will stand out from the surrounding dry (“warmer”) surface.

Insulation Deficiencies

Appreciable temperature differences, due to variations in thermal energy (heat) transfer, allow for detection of deficient or missing insulation when scanning ceiling and wall surfaces.

Roofing Leaks

Scanning roof coverings can reveal water intrusion and accumulated moisture below the surface. Due to its thermal properties (high thermal capacity), water typically gives up heat at a much slower rate than the surrounding roof materials. The areas of accumulated moisture can therefore be detected when scanning the roof surface. This type of roof inspection is best done in the evening or early nighttime after thermal energy imparted during the daytime is transferred or released.

Infrared Thermography in Renton is beneficial in the following areas:

• Detect problems quickly, without interrupting service • Concrete water heated floor inspections for leaks and temperature distribution
• Heat ventilation air conditioning equipment evaluation • Boilers

HOME | SERVICES | RESIDENTIAL INSPECTIONS | COMMERCIAL INSPECTIONS | INFRARED INSPECTIONS | PRE-LISTING INSPECTIONS | PRE-PURCHASE INSPECTIONS | PEST INSPECTIONS | MOLD INSPECTIONS | SCHEDULE YOUR INSPECTION | ABOUT US | INSPECTION FAQs | REAL ESTATE LINKS | CONTACT US